June 08, 2022
Once you jump into an unexpectedly
Once you jump into an unexpectedly cold shower, there may be little you can do
to reverse the damage that's caused the cold deluge! The next right step is
probably an emergency call to your plumber or another water heater repair
expert. To reduce the frequency of these calls, take a little extra time to do
some consistent maintenance on your own.Drain and Flush the Water Heater Tank at
least Once a YearOne of the biggest enemies to your water heater is sediment
buildup. You'll be able to tell when the buildup is getting thick if you hear
either a whining, rumbling or popping noise.
The buildup may also change the
color of your water and cause it to smell like rotten eggs. Sediment buildup on
or under the heating element will affect vital parts of your unit, causing them
to rust, corrode and ultimately break.If you regularly flush clean water through
your water heater, you'll avoid a large amount of buildup. Depending on the area
you live, you may also want to consider purchasing a water softener, which
neutralizes some of the chemicals that cause sediment buildup.
Learn How to
Identify Problems and Replace Basic ComponentsBefore you attempt to check these
parts or do any type of water heater repair, make sure the unit is turned off.
For an electric model, you'll want to turn the power off at the circuit breaker.
For a gas model, turn the pilot control valve to "pilot." Also, shut off the
water supply.When you see water leaking around the base of your water heater,
you'll probably want to check the temperature and pressure relief valve before
jumping China Custom
Wholesale PTC Tower Heaters Suppliers to the conclusion that your tank has
rusted through.
This valve is designed to relieve pressure if your unit ever
begins to overheat. If it's leaking, you'll need to replace it. During yearly
maintenance, simply lift up the lever then let it snap back into place. If it's
working properly, you should hear some water gurgling its way down through the
drain tube.If your water takes on a rust-colored hue, you'll want to check both
the anode rod and the water tank. The anode rod, also known as the sacrificial
anode, is usually made of aluminum or magnesium.
It's designed to draw corrosion
to itself rather than letting the water tank corrode. Once the anode rod has
dissolved, it's time to replace it before corrosion begins to invade the water
tank itself. Once the tank begins to corrode, it's time to replace the unit,
since water heater repair for a rusty tank is virtually impossible.The last
components that may require replacement are the thermocouple or pilot control
valve of a gas water heater, and the thermostat or heating element in an
electric model.
If you're not getting hot water, these are the first items to
check.When in Doubt, Have it Checked by a ProfessionalWhether you can't figure
out what type of water heater repair needs to be done, or you simply don't have
time to do it, call your local plumber for assistance. He'll be more than
willing to fix the current problem and perform yearly maintenance tasks so
you'll have hot water all year!
Posted by: heaterfan at
06:27 AM
| No Comments
| Add Comment
Post contains 545 words, total size 3 kb.
<< Page 1 of 1 >>
9kb generated in CPU 0.0475, elapsed 0.0664 seconds.
32 queries taking 0.0572 seconds, 49 records returned.
Powered by Minx 1.1.6c-pink.
32 queries taking 0.0572 seconds, 49 records returned.
Powered by Minx 1.1.6c-pink.
